Is there anyway to power your cameras using PoE?
All of the Prisual PTZ cameras have PoE built in.
No need for any adapters, just power it using a POE switch.
The Prisual cameras are a Class 3 "Mid-Power" device using 802.3af.
The average load usually falls between 7 - 9 Watts in testing during actual use.
No need for any adapters, just power it using a POE switch.
The Prisual cameras are a Class 3 "Mid-Power" device using 802.3af.
The average load usually falls between 7 - 9 Watts in testing during actual use.